Which Badge Wallet Fits a Narrow Uniform Pocket?
A badge wallet for a narrow uniform pocket needs to pass through the opening comfortably and leave you enough room to get it back out. We’d check the pocket you actually use before choosing by the wallet’s closed size. Two wallets can look close on paper and feel quite different when the opening has a zipper, flap or stiff seam.
Measure the entrance to your pocket

Start with the clear opening where you slide the wallet through. Then feel inside for the seam at the bottom and check how far the wallet can go before the pocket closure gets in the way. If you have an old wallet that works well in that pocket, measure it across its widest part. That gives you something useful to compare against.
The Moonlighter closes to 3 × 4 inches. The Core closes to 3⅜ × 4 inches. Both give you card pockets and a recessed badge panel. The extra ⅜ inch of width on the Core can make room for a wider badge, and can matter at a snug pocket opening.
Try the footprint with a piece of paper

Cut two rectangles from firm paper using those closed dimensions. Try each one in your pocket the way you’d reach for the wallet on a normal day. With a narrow opening, it helps to leave enough room to pinch the wallet without pulling on the seam. Check that you can fasten the pocket if you use the closure.
Paper is a quick check of width and height. For a closer feel, compare against a wallet you already own with the cards you plan to carry. Card load, badge curvature, mount and the optional leather cover each add something to the closed profile. Our badge wallet bulk guide can help you see where that extra thickness comes from.
Let the badge decide which sizes are possible

The Moonlighter accommodates a badge up to 57 × 90 mm. The Core can take a badge up to 68 × 90 mm. Use those as a starting point and check the actual outline. Find your badge in our Badge Library, print the matching outline at Actual Size (100% scale) and lay the physical badge over it. For a wider badge that needs the Core, you can check another pocket using the Core dimensions while we help confirm the cutout and attachment.
We hand sew both models in Canada with premium full grain leather. If you’re between the two layouts, tell us the width of your pocket opening and which badge you carry. We can help you choose a wallet you can reach comfortably. If you send us the actual physical badge to build around, we guarantee the fit.




Comments